[Netkit.users] Interface problem.-
Miguel Angel Ruiz
maruiz a ec.gba.gov.ar
Lun 9 Gen 2006 21:46:43 CET
Hi Fabio,
I have two problems;
First: _____________________________________________________________________________
Pc1(real host)----------------------Pc2(real host)
|------Vrouter1------Vrouter2
- First, profit that pingueen both between realhosts.
[root Pc1]#ping 195.11.14.1 .....ok.-
[root Pc1]#ping 195.11.14.5 .....ok.-
[root Pc2]#ping 195.11.14.5 .....ok.-
[root Pc2]#ping 195.11.14.1 .....ok.-
[root Pc2]#vstart vrouter1 -eth0=tap,195.11.14.5,195.11.14.9 -eth1=A -new
that it creates vrouter1, but,....
[vrouter1]# ping 195.11.14.5 .....fail.-
[root Pc2]# ping 195.11.14.9 .....fail.-
[vrouter1]#route -n
Kernel ip routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
195.11.14.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
0.0.0.0 195.11.14.5 0.0.0.0 UG 0 0 0 eth0
[vrouter1]# router add -net 195.11.14.0 netmask 255.255.255.0 eth0
[vrouter1]# ping 195.11.14.5 .....fail.-
[vrouter1]# vlist
user vhost pid uptime size interfaces
root vrouter1 10795 18:21 12312 eth0 @ tap, eth1 @ A
[root Pc2]#vstart vrouter2 -eth0=A --eth1=B --new
[vrouter2]#ifconfig eth0 195.11.14.11 up
[vrouter2]# router add -net 195.11.14.0 netmask 255.255.255.0 eth0
[vrouter1]# router add -net 195.11.14.0 netmask 255.255.255.0 eth1
[vrouter2]#ping 195.11.14.10 .....ok.-
[vrouter2]#ping 195.11.14.9 .....ok.-
[vrouter2]#ping 195.11.14.5 .....fail.-
second: __________________________________________________________________________
Pc1(real host)----------------------Pc2(real host)
|-----Vrouter1-------Vrouter2
- If start in first place, (#ifconfig..... only show a loopback), and not,... ifconfig eth0,.. eth1. with ip number.-
[root Pc2]#vstart vrouter1 -eth0=tap,195.11.14.5,195.11.14.9 -eth1=A -new
, then, i can reach with ping Pc2--->Vrouter1
but, lost connectivity Pc1(realhost)---------------->Pc2(realhost) , and Pc2 -beyond- to Vrouter1. (At Vrouter1 it arrives).
____________________________________________________________________________________________
Please, if can send some configuration - that has proven -.
Regards,
Michael Angel
----- Original Message -----
From: "Fabio Ricci" <ribio at tiscali.it>
To: "Users of the Netkit Network Emulation System" <netkit.users at did.dia.uniroma3.it>
Cc: <Netkit.users at did.dia.uniroma3.it>
Sent: Thursday, January 05, 2006 1:23 PM
Subject: Re: [Netkit.users] Interface problem.-
> Hi Miguel,
> you have to configure your routing tables,
> please send the starting command for virtual hosts, and the output of
> command "ifconfig && route -n" on your host and virtual hosts
>
> bye
> Fabio
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.dia.uniroma3.it/mailman/private/netkit.users/attachments/20060109/4f796ce8/attachment.html
Maggiori informazioni sulla lista
Netkit.users